Cable measuring device VCPLab

Technical details:

Size (w x l x h) 600 x 360 x 1110 mm
23.6 x 14.2 x 43.7 Inch
   
Weight 33 kg / 73 lbs    
Supply Voltage 100 - 240 V / 50 - 60 Hz    
Input Power max. 100 Watt    
Resolution corresponds to 0.1% of the image field    
Lighting LUMIMAX® LED lighting    
Camera* up to 2 cameras    
Measuring range up to max. 48 mm (1.89“)
outer diameter
   
Measuring according to standards EN 50396
HD 605
ICEA S-94-649-2000
IEC 60502 -1
IEC 60811 -201; -202; -203
IEC 60840
LV112 (A Factor)
   
       

For cable samples with an outer diameter up to 48 mm (1.89")

The cable measuring device VCPLab is a camera-based system for measuring cable geometries from insulations and sheaths. Integrated high resolution sensors allow very accurate measurements of both very thin samples with an outer diameter smaller than 1 mm (0.04“) and cable sheaths with an outer diameter up to 48 mm (1.89").

Device details:

  • Extremely precise measurements thanks to integrated high-resolution sensors
  • Manual focusing and exposure for 2D measurements in the laboratory
  • Robust case
  • Excellent seals against extraneous light
  • Safe from impacts and vibrations
  • Measurement results in just seconds
  • Use of high performance LUMIMAX® lighting
  • Quasi shadow-free transmitted light illumination
  • 2 integrated camera systems possible
  • Standardised individual components
  • Very easy measuring procedure
  • Suitable software: VELOX, CAQ-System ProCable3

Optional

VCPLab inclusive All-In-One Windows PC

* the most suitable configuration can only be determined with your minimum and maximum sample outer diameter (OD)


Other cable measuring devices by VisioCabelPro®

top